I/O (Slot 1) Assemblies - Sun Microsystems Sun Fire E25K Service Manual

9
C H A P T E R

I/O (Slot 1) Assemblies

The hot-swappable hsPCI+ assembly or I/O filler panels for the Sun Fire
E25K/E20K systems are inserted into slot 1, expander 0 through 8 (front), and slot 1,
expander 9 through 17 (rear). This chapter contains the replacement procedures for
the standard hsPCI+ assembly and the I/O filler panels.
This chapter contains the following sections:
Section 9.1, "hsPCI+ (Slot 1) Assembly" on page 9-2
I
I
I
Section 9.2, "PCI Cassette Replacement Procedures" on page 9-8
I
I
Section 9.3, "PCI Cassette Card Replacement Procedures" on page 9-10
I
I
Section 9.4, "I/O (Slot 1) Filler Panel Replacement Procedures" on page 9-11
I
I
I
For your protection, also observe the following safety precautions when setting up
your equipment:
Follow all cautions and instructions marked on the equipment.
I
Always use proper ESD equipment and procedures when handling boards and
I
components.
Never push objects of any kind through openings in the equipment as they might
I
touch dangerous voltage points or short out components that can result in fire or
electric shock.
Refer servicing of equipment to qualified personnel.
I
Section 9.1.1, "hsPCI+ (Slot 1) Assembly LEDs" on page 9-2
Section 9.1.2, "hsPCI+ I/O (Slot 1) Assembly Replacement Procedures" on
page 9-3
Section 9.2.1, "PCI Cassette Replacement" on page 9-8
Section 9.3.1, "PCI Cassette Card Replacement" on page 9-10
Section 9.4.1, "Removing an I/O (Slot 1) Filler Panel" on page 9-11
Section 9.4.2, "Installing an I/O (Slot 1) Filler Panel" on page 9-11
9-1