9.1
hsPCI+ (Slot 1) Assembly
9.1.1
hsPCI+ (Slot 1) Assembly LEDs
Hot-swap PCI (hsPCI+) assembly components and LEDs are listed in
TABLE 9-2
TABLE 9-1
Total Number of hsPCI+ Assemblies
TABLE 9-2
LEDs After Insertion
or Initial System Power On
Active Service Remove Active Service Remove Active Service Remove Active Service Remove
off
Failure of the service LED to transition from ON to OFF within 60 seconds after
insertion indicates a power-status control fault.
FIGURE 9-1
9-2
Sun Fire E25K/E20K Systems Service Manual • April 2004
.
hsPCI+ Assembly Components
Total Number of hsPCI+ Assemblies
Per System
1-18
hsPCI+ Assembly Valid LED Status
LEDs After Presence
is Detected
on
on
off
off
illustrates the hsPCI+ assembly and the LED locations.
Per Side
0-9
Component Powered On
on
on
off
off
and
TABLE 9-1
Number of LEDs Per
hsPCI+ Assembly
15
Component Powered Off
off
off
on