System Control Peripheral Board Leds; Table 7-1 System Control (Sc) Peripheral Board Components - Sun Microsystems Sun Fire E25K Service Manual

I
I
I
Section 7.5, "Digital Audio Tape (DAT) Peripheral Replacement Procedures" on
I
page 7-14
I
I
I
I
For your protection, also observe the following safety precautions when setting up
your equipment:
Follow all cautions and instructions marked on the equipment.
I
Always use proper ESD equipment and procedures when handling boards and
I
components.
Never push objects of any kind through openings in the equipment as they might
I
touch dangerous voltage points or short out components that can result in fire or
electric shock.
Refer servicing of equipment to qualified personnel.
I
7.1

System Control Peripheral Board LEDs

System Control (SC) peripheral board components and LEDs are listed in
and
TABLE 7-2
TABLE 7-1
Total Number of System Control
Peripheral Boards Per System
7-2 Sun Fire E25K/E20K Systems Service Manual • April 2004
Section 7.4.2, "Installing the Hard Drive Peripheral on the System Control (SC)
Peripheral Board" on page 7-13
Section 7.4.3, "Powering On a Hard Drive Peripheral" on page 7-13
Section 7.4.4, "Verifying a Hard Drive Peripheral" on page 7-13
Section 7.5.1, "Removing the Failed DAT Peripheral From the System Control
(SC) Peripheral Board" on page 7-14
Section 7.5.2, "Installing the DAT Peripheral on the System Control (SC)
Peripheral Board" on page 7-15
Section 7.5.3, "Powering On a Digital Audio Tape (DAT) Peripheral" on
page 7-16
Section 7.5.4, "Verifying a Digital Audio Tape (DAT) Peripheral" on page 7-16
.
System Control (SC) Peripheral Board Components
2
Total Number of System Control
Peripheral Boards Per Side
1
TABLE 7-1
Number of LEDs Per System
Control Peripheral Board
6