Sun Microsystems Sun Fire E25K Hardware Installation And Uninstallation Manual
  1. Manuals
  2. Brands
  3. Sun Microsystems Manuals
  4. Servers
  5. Sun Fire E25K
  6. Hardware installation and uninstallation manual

Sun Microsystems Sun Fire E25K Hardware Installation And Uninstallation Manual

Hide thumbs Also See for Sun Fire E25K:
Table of Contents

Advertisement

Quick Links

Download this manual
Sun Fire
E25K/E20K Systems
™
Hardware Installation and Uninstallation Guide
Sun Microsystems, Inc.
www.sun.com
Part No. 817-4135-12
July 2005, Revision A
Submit comments about this document at:
http://www.sun.com/hwdocs/feedback

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Sun Fire E25K and is the answer not in the manual?

Questions and answers

Related Manuals for Sun Microsystems Sun Fire E25K

Summary of Contents for Sun Microsystems Sun Fire E25K

  • Page 1 Sun Fire E25K/E20K Systems ™ Hardware Installation and Uninstallation Guide Sun Microsystems, Inc. www.sun.com Part No. 817-4135-12 July 2005, Revision A Submit comments about this document at: http://www.sun.com/hwdocs/feedback...
  • Page 2 Copyright 2005 Sun Microsystems, Inc., 4150 Network Circle, Santa Clara, Californie 95054, Etats-Unis. Tous droits réservés. Sun Microsystems, Inc. a les droits de propriété intellectuels relatants à la technologie qui est décrit dans ce document. En particulier, et sans la limitation, ces droits de propriété...

  • Page 3: Table Of Contents

    Contents Regulatory Compliance Statements ix Safety Agency Compliance Statements xiii Preface xxv Preparing for Sun Fire E25K/E20K Systems Installation 1–1 Safety Precautions 1–1 Site Preparation 1–4 Installing the Sun Fire E25K/E20K Systems Hardware 2–1 Tools Required 2–1 Connecting Power Cables 2–2 Grounding the Cabinet 2–4...
  • Page 4 Uninstalling Sun Fire E25K/E20K Systems 4–1 Backing Up Your System 4–1 Deconfiguring the Domains 4–1 Preparing to Move the Cabinet 4–3 Preparing the Cabinet 4–4 Crating the Cabinet 4–5 Completing the Packaging 4–10 Sun Fire E25K/E20K Systems Hardware Installation and Uninstallation Guide • July 2005...
  • Page 5 Figures AC Power Cord Installation 2–3 FIGURE 2-1 Sun Fire E25K/E20K Systems Grounding 2–4 FIGURE 2-2 System Board Power and ESD Connections 2–5 FIGURE 2-3 Ground Cable Attachment Point at System Cabinet 2–6 FIGURE 2-4 Cable Label Example 2–9 FIGURE 2-5 Black Cable Hanger Strap With Tie Wrap at Air Plenum 2–9...
  • Page 6 Sun Fire E25K/E20K Systems Hardware Installation and Uninstallation Guide • July 2005...
  • Page 7 Tables Safety Precautions 1–2 TABLE 1-1 Symbols 1–2 TABLE 1-2 Cable Management Kit Contents 2–8 TABLE 2-1 Access Route Clearance 4–5 TABLE 4-1...
  • Page 8 Sun Fire E25K/E20K Systems Hardware Installation and Uninstallation Guide • July 2005...

  • Page 9: Regulatory Compliance Statements

    Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense. Modifications: Any modifications made to this device that are not approved by Sun Microsystems, Inc. may void the authority granted to the user by the FCC to operate this equipment.
  • Page 10 ICES-003 Class B Notice - Avis NMB-003, Classe B This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Sun Fire E25K/E20K Systems Hardware Installation and Uninstallation Guide • July 2005...
  • Page 11 BSMI Class A Notice The following statement is applicable to products shipped to Taiwan and marked as Class A on the product compliance label. T33012 GOST-R Certification Mark...
  • Page 12 Sun Fire E25K/E20K Systems Hardware Installation and Uninstallation Guide • July 2005...

  • Page 13: Safety Agency Compliance Statements

    Do not make mechanical or electrical modifications to the the equipment’s electrical rating label. equipment. Sun Microsystems is not responsible for Never push objects of any kind through openings in ■ regulatory compliance of a modified Sun product.
  • Page 14 Do not connect the power cord when the power supply has been removed from the system chassis. Sun Fire E25K/E20K Systems Hardware Installation and Uninstallation Guide • July 2005...
  • Page 15 Rack System Warning CD and DVD Devices The following warnings apply to Racks and Rack Mounted The following caution applies to CD, DVD, and other systems. optical devices. Caution – For safety, equipment should Caution – Use of controls, adjustments, or the always be loaded from the bottom up.
  • Page 16 Conformité SELV cordons d'alimentation. Le niveau de sécurité des connexions E/S est conforme aux normes SELV. Sun Fire E25K/E20K Systems Hardware Installation and Uninstallation Guide • July 2005...
  • Page 17 Mise en garde relative aux batteries Attention – Afin d'éviter que le rack ne penche pendant l'installation du matériel, tirez Attention – Les batteries risquent d’exploser la barre anti-basculement du rack. en cas de manipulation maladroite ou de remplacement incorrect. Pour les systèmes dont les batteries sont remplaçables, effectuez Attention –...
  • Page 18 Lautstärke dieses Produkts weniger als 70 dB(A). Achtung – Gefährliche Spannungen. Befolgen Sie die Anweisungen, um Stromschläge und Verletzungen zu vermeiden. SELV-Konformität Der Sicherheitsstatus der E/A-Verbindungen entspricht den SELV-Anforderungen. Sun Fire E25K/E20K Systems Hardware Installation and Uninstallation Guide • July 2005...
  • Page 19 Anschluss des Netzkabels Warnung bezüglich Batterien Achtung – Sun-Geräte sind für Achtung – Bei unsachgemäßer Handhabung Stromversorgungssysteme mit einem oder nicht fachgerechtem Austausch der geerdeten neutralen Leiter (geerdeter Batterien besteht Explosionsgefahr. Verwen- Rückleiter bei gleichstrombetriebenen den Sie bei Systemen mit austauschbaren Geräten) ausgelegt.
  • Page 20 Geräte: personales, siga las instrucciones. Achtung – Die hier nicht aufgeführte Verwendung von Steuerelementen, Anpassungen oder Ausführung von Vorgängen kann eine gefährliche Strahlenbelastung verursachen. Sun Fire E25K/E20K Systems Hardware Installation and Uninstallation Guide • July 2005...
  • Page 21 No realice modificaciones de tipo mecánico ni eléctrico en el eléctrica. Los alargadores de uso doméstico no equipo. Sun Microsystems no se hace responsable del cuentan con protección frente a sobrecargas y cumplimiento de normativas en caso de que un producto no están diseñados para su utilización con...
  • Page 22 Class 1 Laser Product cubierta. De lo contrario, puede sufrir lesiones Luokan 1 Laserlaite personales y ocasionar daños en el sistema. Klasse 1 Laser Apparat Laser Klasse 1 xviii Sun Fire E25K/E20K Systems Hardware Installation and Uninstallation Guide • July 2005...
  • Page 23 Dispositivos de CD y DVD La siguiente medida se aplica a los dispositivos de CD y DVD, así como a otros dispositivos ópticos: Precaución – La utilización de controles, ajustes o procedimientos distintos a los aquí especificados puede dar lugar a niveles de radiación peligrosos.
  • Page 24 Sun Fire E25K/E20K Systems Hardware Installation and Uninstallation Guide • July 2005...

  • Page 25: Preface

    Preface The Sun Fire E25K/E20K Systems Hardware Installation and Uninstallation Guide provides procedures for installing and configuring the host hardware and software. This document is for service personnel and customer data center staff who are involved in the site preparation for and installation of the Sun Fire™ E25K/E20K systems.
  • Page 26 You must be superuser to do this. with real names or values. To delete a file, type rm filename. 1 The settings on your browser might differ from these settings. xxvi Sun Fire E25K/E20K Systems Hardware Installation and Uninstallation Guide • July 2005...
  • Page 27 Sun Fire E25K/E20K Systems Service Manual Service Sun Fire E25K/E20K Systems Service Reference I–Nomenclature Service Sun Fire E25K/E20K Systems Service Reference II–Component Numbering Accessing Sun Documentation You can view, print, or purchase a broad selection of Sun documentation, including localized versions, at: http://www.sun.com/documentation...
  • Page 28 CPUs is limited to repair or one-for-one replacement of CPUs in products exported in compliance with U.S. export laws. Use of CPUs as product upgrades unless authorized by the U.S. Government is strictly prohibited. xxviii Sun Fire E25K/E20K Systems Hardware Installation and Uninstallation Guide • July 2005...

  • Page 29: Preparing For Sun Fire E25K/E20K Systems Installation

    C H A P T E R Preparing for Sun Fire E25K/E20K Systems Installation Safety Precautions For your protection, observe the following safety precautions when setting up your equipment: Follow all cautions, warnings, and instructions marked on the equipment. ■...
  • Page 30 Caution Risk of personal injury and equipment damage. To reduce the risk, follow the instructions. A terminal to which alternating current or voltage can be applied. Sun Fire E25K/E20K Systems Hardware Installation and Uninstallation Guide • July 2005...
  • Page 31 Caution – Before you begin, carefully read each of the procedures in this manual. If you have not performed similar operations on comparable equipment, do not attempt to perform these procedures. Chapter 1 Preparing for Sun Fire E25K/E20K Systems Installation...

  • Page 32: Site Preparation

    Site Preparation Note – Site preparation is detailed in the Sun Fire E25K/E20K Systems Site Planning Guide. It is the customer’s responsibility to prepare the site. Sun Microsystems Customer Service or an authorized distributor can assist with the site-planning process and will install the equipment upon notification of delivery from the customer.

  • Page 33: Installing The Sun Fire E25K/E20K Systems Hardware

    ■ Section 2.8, “Powering On the System” on page 2-13 ■ Note – Refer to the Sun Fire E25K/E20K systems Unpacking Guide for information on unpacking the system and moving it safely to the operating location. Tools Required 1/8-inch straight-blade screwdriver ■...

  • Page 34: Connecting Power Cables

    2. Verify with a digital voltmeter (DVM) that the incoming AC voltage is correct for the customer site. Refer to the Sun Fire E25K/E20K Systems Site Planning Guide for further information. Sun Fire E25K/E20K Systems Hardware Installation and Uninstallation Guide • July 2005...

  • Page 35: Figure 2-1 Ac Power Cord Installation

    AC Power Cord Installation FIGURE 2-1 Note – Sun Fire E25K/E20K systems can operate while one power supply is being serviced and with two independent power sources as as long as the systems stay under 20,000W DC power consumption as measured by the SMS command showenvironment -p powers.

  • Page 36: Grounding The Cabinet

    Grounding the Cabinet Sun Fire E25K/E20K systems achieve earth ground through the power cords. For this reason, a grounding cable is not provided with the system. The power cords have three prongs: two for current and one for ground. At the AC input module, the ground prong and system chassis are connected.

  • Page 37: Figure 2-3 System Board Power And Esd Connections

    48V - Frame 1st level engage Board skin Safety ground Diode protected board screws mate with board skin System Board Power and ESD Connections FIGURE 2-3 Chapter 2 Installing the Sun Fire E25K/E20K Systems Hardware...

  • Page 38: Figure 2-4 Ground Cable Attachment Point At System Cabinet

    3. Attach the ground cable to the system, behind the kick plate, at the bottom of the frame base as shown in FIGURE 2-4 System cabinet base Ground cable attachment point Kick plate Ground Cable Attachment Point at System Cabinet FIGURE 2-4 Sun Fire E25K/E20K Systems Hardware Installation and Uninstallation Guide • July 2005...

  • Page 39: Connecting The System Controller

    Connecting the System Controller The Sun Fire E25K/E20K systems have a system controller (System Control board and system control peripheral) that supports administrative control and monitoring of the platform. Two system controllers are included in each Sun Fire Sun Fire frame.

  • Page 40: Managing I/O Cables

    51.0 in. (129.5 cm) green buckle strap; rear door maintenance straps 18 in. (14.7 cm) green cable straps Cable Metal brackets used with two door (one in front) Management systems. Bracket Assembly Sun Fire E25K/E20K Systems Hardware Installation and Uninstallation Guide • July 2005...

  • Page 41: Installing The Permanent Cable Straps

    Cable Hanger Strap With Tie Wrap at Air Plenum FIGURE 2-6 4. Use side-cutting pliers to cut off the ends of the tie wraps at the air plenum. Chapter 2 Installing the Sun Fire E25K/E20K Systems Hardware...
  • Page 42 9. Repeat Step 3 through Step 8 for the remaining I/O boards. Note – For a fully populated system, you should have nine sets of cables hanging vertically at the front or rear of the system. 2-10 Sun Fire E25K/E20K Systems Hardware Installation and Uninstallation Guide • July 2005...

  • Page 43: Figure 2-7 Black Permanent Straps

    ( FIGURE 2-7 Note – Leave enough slack in the cabling below the floor tile for cable lifting during component maintenance. Chapter 2 Installing the Sun Fire E25K/E20K Systems Hardware 2-11...

  • Page 44: Completing The Installation

    Caution – Do not allow the leveling feet to support the entire weight of the system cabinet. Confirm this by visually inspecting the casters to verify that they are in contact with the floor. 2-12 Sun Fire E25K/E20K Systems Hardware Installation and Uninstallation Guide • July 2005...

  • Page 45: Powering On The System

    The hardware installation is now complete. In the event of a failure, refer to the following documents: Sun Fire Sun Fire Systems Overview Manual ■ Sun Fire Sun Fire Systems Service Manual ■ Chapter 2 Installing the Sun Fire E25K/E20K Systems Hardware 2-13...
  • Page 46 2-14 Sun Fire E25K/E20K Systems Hardware Installation and Uninstallation Guide • July 2005...

  • Page 47: Installing The Sun Fire E25K/E20K Systems Software

    Initial Domain Configuration The procedures in this chapter are used to install customer network parameters on the first domain of the Sun Fire E25K/E20K systems. These procedures assume that you have opened both an SC command-line window and a domain console (1M) window at your terminal display.
  • Page 48 When the first time the domain operating system is booted, the administrator is asked to define host-specific information. This includes the hostname, locale, and IP address. See the Solaris installation manuals for this information. Sun Fire E25K/E20K Systems Hardware Installation and Uninstallation Guide • July 2005...

  • Page 49: Running Sunvts On The Host

    Refer to the “control panel” section of the SunVTS documentation if there is a discrepancy. If SunVTS fails to display a device that you know is physically present in the system, recheck your installation carefully. Chapter 3 Installing the Sun Fire E25K/E20K Systems Software...
  • Page 50 5. Monitor the status of SunVTS. Verify that the system is running and that no test failures are occurring. 6. Repeat Step 2 through Step 5 for each domain to be tested. Sun Fire E25K/E20K Systems Hardware Installation and Uninstallation Guide • July 2005...

  • Page 51: Uninstalling Sun Fire E25K/E20K Systems

    Have the system administrator verify that all domains and the SCs have been properly backed up. Deconfiguring the Domains 1. Deconfigure the domains. Refer to the most recent version of the Sun Fire E25K/E20K Systems Management Services (SMS) Administrator Guide. 2. Save the SMS configuration files. 3. Deconfigure the SC.
  • Page 52 Section 16.2.1, “Powering Off the System for Cable Replacement” on page 16-8 ■ Note – The Sun Fire E25K/E20K Systems Service Manual states that all DC circuit breakers are to remain in the On position at all times. Disregard this statement when deconfiguring the domain in preparation for system relocation.

  • Page 53: Preparing To Move The Cabinet

    Preparing to Move the Cabinet 1. Because shipping foam compresses in transit, Sun Fire E25K/E20K systems cabinets cannot be shipped with a previously used shipping pallet. Obtain a new shipping package that contains a new pallet along with some of the following...

  • Page 54: Preparing The Cabinet

    (if installed). 7. Raise the leveling feet and ensure that they are fully retracted into the cabinet frame ( FIGURE 4-1 Caster Leveling foot Retracted Leveling Feet FIGURE 4-1 Sun Fire E25K/E20K Systems Hardware Installation and Uninstallation Guide • July 2005...

  • Page 55: Crating The Cabinet

    Align the tines of the ramps with the corresponding holes on the pallet deck. Verify that the ramps are firmly in position by pressing or standing on the back side of the tines. Chapter 4 Uninstalling Sun Fire E25K/E20K Systems...

  • Page 56: Figure 4-2 Cabinet Kick Plate Assembly Removal

    Set the kick plate assemblies aside. Kick plate Spring-loaded captive locking mounting bracket Kick plate mounting tube Kick plate Cabinet Kick Plate Assembly Removal FIGURE 4-2 Sun Fire E25K/E20K Systems Hardware Installation and Uninstallation Guide • July 2005...

  • Page 57: Figure 4-3 Installed Ramps On Pallet Deck

    4. Push the cabinet up the ramps and onto the shipping pallet deck. Caution – One or two persons should push while two others guide the cabinet into the designated shipping position. Chapter 4 Uninstalling Sun Fire E25K/E20K Systems...

  • Page 58: Figure 4-4 Cabinet On Shipping Pallet Deck

    Use the 9/16-inch open-end wrench to secure the shipping brackets. Shipping brackets and bolts Chock Cabinet on Shipping Pallet Deck FIGURE 4-4 Sun Fire E25K/E20K Systems Hardware Installation and Uninstallation Guide • July 2005...
  • Page 59 Confirm that the doors can open for servicing. 11. Remove the ramps from the shipping pallet deck and store them at the side(s) of the cabinet. Chapter 4 Uninstalling Sun Fire E25K/E20K Systems...

  • Page 60: Completing The Packaging

    Internal carton top cap Plastic bag and service documentation package Shipping kit boxes (2 each) Ramps Hardware box Final Packaging and Outside Carton Packaging Assemblies FIGURE 4-5 4-10 Sun Fire E25K/E20K Systems Hardware Installation and Uninstallation Guide • July 2005...

  • Page 61: Cabinet Ready For Shipping

    Cabinet Ready for Shipping FIGURE 4-6 8. Apply the device found in the shipping package to the upper half of TIP-N-TELL the carton side. Note – Use a 60-inch pallet jack to transport the container. Chapter 4 Uninstalling Sun Fire E25K/E20K Systems 4-11...
  • Page 62 4-12 Sun Fire E25K/E20K Systems Hardware Installation and Uninstallation Guide • July 2005...

This manual is also suitable for:

Sun fire e20k

Table of Contents