Installing A Kick Plate Assembly; Figure 17-1 Kick Plate Assembly - Sun Microsystems Sun Fire E25K Service Manual

Spring-loaded captive locking
pin (not visible in diagram)
FIGURE 17-1
2. Loosen the two captive panel fasteners of the kick plate mounting bracket
assembly.
3. Remove the kick plate assembly by pulling forward and tipping downward to
release the inner support tabs from their mounting holes at the cabinet frame
base.
17.3.2

Installing a Kick Plate Assembly

1. Insert the inner support tabs of the kick plate mounting bracket at the base of the
cabinet.
2. Align the two outer tabs at the front mounting holes of the cabinet frame and
slide the bracket inward to align the inner support tabs into the two mounting
holes of the horizontal support structure under the cabinet.
3. Secure the mounting bracket with the two captive panel fasteners.
4. Insert the square mounting tube of the kick plate mounting bracket assembly
until it is flush with the cabinet.
5. Secure the kick plate with the spring-loaded captive locking pin at the left side of
the mounting tube.
17-4 Sun Fire E25K/E20K Systems Service Manual • April 2004
Inner support tabs connected
to cabinet frame base
Outer support tabs connected
to cabinet frame base
Kick plate
Kick Plate Assembly
Mounting bracket
Spring-loaded
locking pin
Mounting tube
Support guides