Side Panel Replacement; Removing A Side Panel; Installing A Side Panel; Access Door Replacement - Sun Microsystems Sun Fire E25K Service Manual

17.1

Side Panel Replacement

The Sun Fire E25K/E20K systems have four panels, two per side.
17.1.1

Removing a Side Panel

1. Release the two (2) spring-loaded captive fasteners by pushing inward and
making a counterclockwise turn.
2. Using both hands, firmly grasp the panel on each side, near the top, and lift
straight up and then outward to remove the panel away from the cabinet.
17.1.2

Installing a Side Panel

1. Using both hands, firmly grasp the panel on each side, near the top.
2. Lift the panel holding at an angle, approximately one (1) foot out from the base.
3. Hang the panel on the side skin-hanger features at the left outer corner and right
inner post (or right outer corner and left inner post for other panel, depending on
which panel is being replaced) of the chassis.
17.2

Access Door Replacement

The Sun Fire E25K/E20K systems have four access doors.
one 22-inch wide ventilated front-left door
I
one 10 1/4-inch ventilated front-right door (side 0)
I
one 22-inch wide perforated rear-left door
I
one 10 1/4-inch perforated rear-right door (side 1).
I
17-2 Sun Fire E25K/E20K Systems Service Manual • April 2004