Powering On A Digital Audio Tape (Dat) Peripheral; Verifying A Digital Audio Tape (Dat) Peripheral - Sun Microsystems Sun Fire E25K Service Manual

7.5.3 Powering On a Digital Audio Tape (DAT)
Peripheral
G
Power on the SC by using the Sun Management Center or from the main SC by
typing the following SMS command:
sc% resetsc
About to reset other SC. Are you sure you
want to continue? (yes/no)? yes
7.5.4

Verifying a Digital Audio Tape (DAT) Peripheral

G
Verify the DAT.
See Section 7.2.6, "Verifying a System Control (SC) Peripheral Board" on page
7-16 Sun Fire E25K/E20K Systems Service Manual • April 2004
7-8.