Pci Cassette Replacement Procedures; Pci Cassette Replacement - Sun Microsystems Sun Fire E25K Service Manual

If the domain was shut down prior to the expander replacement, start the domain
by typing:
sc% setkeyswitch -d domain_id
2. Examine the POST messages reported by the addboard/setkeyswitch for any
errors. Also monitor the message logs on the SC, specifically
/var/opt/SUNWSMS/adm/platform/messages and
/var/opt/SUNWSMS/adm/domain_id/messages.
9.2

PCI Cassette Replacement Procedures

The cassettes in the hsPCI+ are hot-swap components.
9.2.1

PCI Cassette Replacement

9.2.1.1 Removing the PCI Cassette
Caution – Before removing a cassette, the green activation LED must be off and the
amber or blue removal OK LED must be on. See
descriptions.
1. Open the Sun Fire E25K/E20K system cabinet access doors.
2. Ensure that the adapter in the cassette to be removed has terminated all
input/output operations. Refer to the man pages for ifconfig or umount for
more information.
3. The customer domain administrator should power off the cassette by typing the
following rcfgadm command:
sc% rcfgadm -d domain_id -c disconnect ap_id
where ap_id is a DR attachment point identifier for the PCI cassette. Refer to the
rcfgadm man page for attachment point identifier details.
4. Wait for the amber or blue removal indicator LED to illuminate.
9-8 Sun Fire E25K/E20K Systems Service Manual • April 2004
on
for hsPCI+ LED
TABLE 9-2