Sun Microsystems Sun Fire E25K Service Manual page 82

5. On the main SC, verify that it has assumed the main role and that failover is
disabled by typing:
sc% showfailover -r
MAIN
sc% showfailover
SC Failover Status:
If failover is disabled, go to
6. On the main SC, disable the failover mechanism by typing:
sc% setfailover off
7. Verify the failover is DISABLED by typing:
sc% showfailover
SC Failover Status:
8. If the spare SC is running Solaris software, as superuser, shut down the spare
(inactive) SC by typing:
sc_spare# shutdown -y -g seconds -i 0
where seconds is the amount of time before shutdown.
9. Power off the spare (inactive) SC by using the Sun Management Center or from
the main SC by typing the following SMS command:
sc% poweroff scx
where x is 0 or 1. Refer to poweroff(1M) for more information.
The poweroff command will query the user to continue.
Note – The poweroff command only supports poweroff of the other SC
(poweroff SC0 at SC1 or SC1 at SC0). If the user executes poweroff of SC0 from
SC0, the command will fail.
6-6 Sun Fire E25K/E20K Systems Service Manual • April 2004
DISABLED
Step 8.
DISABLED