Interrupt Sources; Clock And Reset; I/O Timing; Serial Data - Renesas EMMA Mobile 1 User Manual

4.3 Interrupt Sources

The UART interface uses four interrupts.
Interrupt Name
Modem status interrupt
Reception error (receiver line status) interrupt
Transmit buffer empty (transmit hold register (THR) empty)
interrupt
Reception error (received data available)/timeout interrupt

4.4 Clock and Reset

The following clock is used for the UART interface:
 U70_SCLK
Used for accessing the APB bus.
For details about clock/reset settings, see the Multimedia Processor for Mobile Applications - System
Control/General-Purpose I/O Interface User's Manual (S19265E).

4.5 I/O Timing

4.5.1 Serial data

Clock (baud rate)
D0
CHAPTER 4 DESCRIPTION OF FUNCTIONS

Table 4-1. Interrupt Sources

16 cycles
D1 D2 D3 D4
User's Manual S19262EJ3V0UM
Bit Assignment
Bit 3 (EDSSI) of the IER register
Bit 2 (ELSI) of the IER register
Bit 1 (ETBEI) of the IER register
Bit 0 (ERBI) of the IER register
D5 D6 D7 Parity Stop
39