Remote Log - TP-Link T3700G-28TQ User Manual

Log File:
Severity:
Status:
Sync-Periodic

18.2.3 Remote Log

Remote log feature enables the switch to send system logs to the Log Server. Log Server is to
centralize the system logs from various devices for the administrator to monitor and manage the
whole network.
Choose the menu Maintenance→Log→Remote Log to load the following page.
The following entries are displayed on this screen:
Log Host

Index:
Host IP:
UDP Port:
Severity:
Status:
Indicates the flash sector for saving system log. The inforamtion
in the log file will not be lost after the switch is restarted and can
be exported on the Backup Log page.
Specify the severity level of the log information output to each
channel. Only the log with the same or smaller severity level
value will be output.
Enable/Disable the channel.
Specify how frequent the log information would be synchronized
to the log file.
Figure18-5 Log Host
Displays the index of the log host. The switch supports 4 log
hosts.
Configure the IP for the log host.
Displays the UDP port used for receiving/sending log
information. Here we use the standard port 514.
Specify the severity level of the log information sent to each log
host. Only the log with the same or smaller severity level value
will be sent to the corresponding log host.
Enable/Disable the log host.
376