Snmp View - TP-Link JetStream T1500G-10MPS User Manual

Local Engine

Local Engine ID:
Remote Engine

Remote Engine ID:
Note:
The amount of Engine ID characters must be even.

13.1.2 SNMP View

The OID (Object Identifier) of the SNMP packets is used to describe the managed objects of the
switch, and the MIB (Management Information Base) is the set of the OIDs. The SNMP View is
created for the SNMP management station to manage MIB objects.
Choose the menu SNMP→SNMP Config→SNMP View to load the following page.
The following entries are displayed on this screen:
View Config

View Name:
MIB Object ID:
Specify the switch's Engine ID for the remote clients. The
Engine ID is a unique alphanumeric string used to identify the
SNMP engine on the switch.
Specify the Remote Engine ID for switch. The Engine ID is a
unique alphanumeric string used to identify the SNMP engine
on the remote device which receives traps and informs from
switch.
Figure 13-4 SNMP View
Give a name to the View for identification. Each View can
include several entries with the same name.
Enter the Object Identifier (OID) for the entry of View.
188