Standard-Ip Acl - TP-Link JetStream T1600G-28TS User Manual

12.1.4 Standard-IP ACL

Standard-IP ACLs analyze and process data packets based on a series of match conditions, which
can be the source IP addresses and destination IP addresses carried in the packets.
Choose the menu ACL→ACL Config→Standard-IP ACL to load the following page.
The following entries are displayed on this screen:
Create Standard-IP ACL

ACL ID:
Rule ID:
Operation:
S-IP:
D-IP:
Mask:
Figure 12-4 Create Standard-IP Rule
Select the desired Standard-IP ACL for configuration.
Enter the rule ID.
Select the operation for the switch to process packets which match
the rules.
Permit: Forward packets.

Deny: Discard Packets.

Enter the source IP address contained in the rule.
Enter the destination IP address contained in the rule.
Enter IP address mask. If it is set to 1, it must strictly match the
address.
175