Searching The Ospf Link State Database - Lucent Technologies Cajun P220 Operation Manual

Configuring the OSPF Routing Protocol (Layer 3)
Parameter
N-Option
OPQ-Option
DR Choice
BDR Choice

Searching the OSPF Link State Database

To perform a search of your OSPF link state database:
1. In the OSPF Display section of the Web Agent window, click Link State
Database Search. The Link State Database Search dialog box opens.
Note: It is possible to select more than one item in the Search By column to help
2. To search by Area ID: click the Area ID checkbox and specify the IP address of
the Area ID that you want to find in the database, and click SEARCH.
To search by Type: click the Type checkbox and from the Type pull-down menu,
select the type of search you want to perform, and click SEARCH.
To search by Router ID: click the Router ID checkbox and specify the router IP
address, and click SEARCH.
9-12
Table 9-8. OSPF Neighbors Parameters (Continued)
Definition
Specifies whether this neighbor supports the handling of Type-7
LSAs.
Specifies whether this neighbor supports opaque LSAs (Link
State Advertisements).
Interface IP address of the designated router.
Interface IP address of the backup designated router.
narrow your search results.
Cajun P550/P220 Switch Operation Guide