Configuring Vrrp Authentication; Displaying Vrrp Statistics - Lucent Technologies Cajun P220 Operation Manual

Configuring IP Routing (Layer 3)
Parameter
Priority
Advertisement Timer The number of seconds a Master virtual router
Auth Type
Auth Key
Addr Owner
Override
4. Click CREATE to save your changes, or CANCEL to restore previous settings.

Configuring VRRP Authentication

To configure VRRP authentication:
1. In the IP Configuration section of the Web Agent window, click Interfaces. The
IP Interfaces dialog box opens.
2. Select the interface on which to enable VRRP authentication.
3. From the VRRP Auth Type pull-down menu, select Simple.
4. In the VRRP Auth Key field, enter your authentication password. The default is
LUCENT.
5. Click APPLY to save your changes, or CANCEL to restore previous settings.

Displaying VRRP Statistics

To view VRRP virtual router statistics:
1. In the IP Display section of the Web Agent window, click VRRP Statistics. The
VRRP Statistics dialog box opens.
7-44
Table 7-31. VRRP Configuration Parameters (Continued)
Defines...
The sending VRRP router's priority. Higher values equal
higher priority. Possible values:
• 255 - The value that must be assigned to the Master.
• 1 to 254 - Values that must be used for routers backing
up a virtual router.
• 0 - the current Master is disabled. Allows Backup routers
to trigger without waiting for the current Master to
timeout.
advertises itself.
The VRRP authentication method. The default is None.
The VRRP authentication key for the interface. The
default is LUCENT.
The address owner override.
Cajun P550/P220 Switch Operation Guide