Managing Intelligent Multicasting (Layer 2 & Layer 3)
Displaying Router Ports
To display router ports:
1. In the Intelligent Multicasting section of the Web Agent window, click Global
Configuration. The Intelligent Multicast Global Configuration dialog box opens.
Note: You must enable intelligent multicasting on a global basis to make your router
ports active. See "Configuring Global Intelligent Multicasting", earlier in this
chapter.
2. Click Display/Configure Router Ports. The Router Port Display/Configuration
dialog box opens.
3. Use Table 15-2 for more information on router ports.
Parameter
Port
VLAN
Application
4. Select a router port and click DELETE to remove a router port, or CANCEL to
restore previous settings.
Configuring Static Router Ports
To configure a static router port:
1. In the Intelligent Multicasting section of the Web Agent window, click Global
Configuration. The Intelligent Multicast Global Configuration dialog box opens.
Note: You must enable intelligent multicasting on a global basis to make your static
router port configuration active. See "Configuring Global Intelligent
Multicasting", earlier in this chapter.
15-6
Table 15-2. Router Port Display Parameters
Definition
Displays the router port in the multicast session.
Displays the port VLAN of the router.
Displays the active applications of the router port.
Applications include:
• Mgmt (Static)
• IGMP
• LGMP
• CGMP
Cajun P550/P220 Switch Operation Guide