Deleting Ipx Static Service - Lucent Technologies Cajun P220 Operation Manual

Configuring IPX Routing (Layer 3)
3. Use Table 4-5 to complete your configuration:
Parameter
Service Name
Type
Network
Node
Socket
Next-Hop Node
Interface
Hops

Deleting IPX Static Service

To delete an IPX static service:
1. From the IPX Configuration section of the Web Agent window, click Static
Services. The IPX Static Services dialog box opens.
2. Select the IPX static service to be removed.
3. Click DELETE to remove the static service, or CANCEL to restore previous
settings.
4-8
Table 4-5. IPX Static Service Parameters
Allows you to specify the...
Name of the IPX static service. For example, FS_ENG01. Use SLIST
(NetWare 3.x) or NLIST (NetWare 4.x) to list your current server
names and types from your NetWare server.
Service type (in hex) that identifies the type of IPX static service the
server provides. Well-known service types include:
• Unknown (0)
• Print Queue (3)
• File Server (4)
• Job Server (5)
• Print Server (7)
• Archive Server (9)
• Remote Bridge Server (24)
• Advertising Print Server (47)
Network number (in hex) of the IPX static service.
Node address (in hex) of the IPX static service.
The format of the node value is aa:bb:cc:dd:ee:ff.
Number (in hex) associated with a running process on the end node
(for example, RIP, NLSP).
MAC address of the next destination through which the service is
reached.
The format of the node value is aa:bb:cc:dd:ee:ff.
Interface that corresponds to the next-hop node.
Number of routers (hops) that the packet must pass through before
reaching the network number associated with the service.
Cajun P550/P220 Switch Operation Guide