Configuring Spanning Tree Bridge Ports - Lucent Technologies Cajun P220 Operation Manual

Parameter
Bridge Forward Delay
Max Age
Hello Time
Forward Delay
7. Click APPLY to save your changes, or CANCEL to restore previous settings.

Configuring Spanning Tree Bridge Ports

To configure spanning tree bridge ports:
1. In the Switching Parameters section of the Web Agent window, click Spanning
Tree. The Spanning Tree Information dialog box opens.
2. In the Bridge Ports column, click the port number listed. The Spanning Tree
Bridge Port Information dialog box opens.
3. Use Table 12-5 to configure the Spanning Tree Bridge port parameters:
Parameter
Bridge Port
Port
Name
Cajun P550/P220 Switch Operation Guide
Using VLANs, Spanning Tree, and Hunt Groups (Layer 2 and Layer 3)
Table 12-4. Bridge-Level Parameters (Continued)
Definition
Amount of delay used when a port transitions to the
forwarding state. Set by the root bridge for the segment.
Note:
You must enter a value within the supported
range or the configuration operation will
fail. The supported value range for this
parameter is 10-30.
Current maximum age for this spanning tree. Determined
by the root bridge.
Current hello time for this spanning tree. Determined by
the root bridge.
Current forwarding delay for this spanning tree. Set by the
root bridge.
Table 12-5. Spanning Tree Bridge Port Parameters
Options
The bridge port.
The spanning tree bridge port number.
The name assigned to the bridge port.
12-9