Examining The Ipx Service Table - Lucent Technologies Cajun P220 Operation Manual

3. Use Table 4-10 to determine the search parameters:
Parameter
Source
Interface
Service Name
Service Type
4. Click Search to start the search. If available services are found they are displayed
in IPX Service Table dialog box. In services are not available, a message displays in
the IPX Service Table dialog box.

Examining the IPX Service Table

To examine the IPX service table:
1. Perform an IPX Service table search as described in "Searching the IPX Service
Table", earlier in this chapter. If available services are found they are displayed in
the IPX Service Table dialog box.
Cajun P550/P220 Switch Operation Guide
Table 4-10. IPX Service Table Search Parameters
Allows you to perform a search...
In your IPX service table, use one of the following
parameters:
• SAP - Services learned via the SAP protocol
• Static - User configuration
• Local - Local services
Once you select one of these parameters, the search
will attempt to find services associated with the
parameter you chose.
Based on the interface associated with the next-hop to
the service.
Based on a service name you specify. Note that you
can specify a single asterisk (*) to indicate a wildcard
character that will match all characters entered before
the wildcard. For example, entering FS_ENG* will find
all service names that start with FS_ENG.
Based on the service type you specify. For example, to
specify a print queue type, you would enter 3 (0003h)
in the space provided.
Configuring IPX Routing (Layer 3)
4-13