Deleting Ospf Virtual Links - Lucent Technologies Cajun P220 Operation Manual

Configuring the OSPF Routing Protocol (Layer 3)
3. Use Table 9-4 to complete your OSPF virtual link configuration:
Parameter
Router ID
Area
Transit Delay
Retransmit Interval
Hello Interval
Dead Interval
Authentication
Authentication Key
MD5 Key ID
4. Click CREATE to save your changes, or CANCEL to restore previous settings.

Deleting OSPF Virtual Links

To delete an OSPF virtual link:
1. In the OSPF Configuration section of the Web Agent window, click Virtual
Links. The OSPF Virtual Links dialog box opens.
2. Select the virtual link to be removed.
3. Click DELETE. The virtual link is removed.
9-6
Table 9-4. OSPF Virtual Link Parameters
Defines the...
Router ID for the far end of the virtual link.
Area ID of the area through which the virtual link travels.
Estimated number of seconds it takes to transmit a link state
update packet over this virtual link.
Number of seconds between link-state advertisement
retransmissions on this virtual link, for adjacencies belonging to
this virtual link. This value is also used when retransmitting
database description and link-state request packets.
Length of time, in seconds, between the Hello packets that the
router sends on the virtual link. This value must be the same for
all routers attached to a common network.
Number of seconds that a router's Hello packets have not been
seen before it's neighbors declare the router down. This should
be some multiple of the Hello interval. This value must be the
same for all routers attached to a common network.
Type of authentication available for use on a given OSPF
interface. Authentication types include:
• None
• Simple Password
• MD5 Authentication
Area's authentication key.
MD5 authentication key ID as a decimal value.
Cajun P550/P220 Switch Operation Guide