16
Monitoring the Cajun Switch (Layer 2 &
Layer 3)
Overview
This chapter and its procedures are common to both Layer 2 and Layer 3 configuration.
Included in this chapter:
Interpreting Front Panel LED Displays
Checking Active Alarms
Using the Event Subsystem
Setting Log Size
Interpreting Front Panel LED Displays
Use Table 16-1 to interpret the state of the front-panel LEDs:
Module...
LED...
All Modules
Module Status
Gigabit
TX and RX
Modules
Port
Cajun P550/P220 Switch Operation Guide
Table 16-1. Front Panel LED Display Interpretation
Behavior...
Solid green
Flashing yellow
Off
Flashing yellow
Off
Solid green
Flashing green
Flashing yellow
Off
Indicates...
Normal operation.
Diagnostic failure.
Module not operational or not receiving power.
Port sending/receiving traffic.
Port not sending/receiving traffic.
Port enabled with link up.
Port disabled with link up.
Hardware failure.
No link.
16-1