Displaying The Forwarding Cache - Lucent Technologies Cajun P220 Operation Manual

3. Use Table 11-4 to determine the parameters you use in your search:
Parameter
Destination Address
Source Address
Protocol
Destination Port
Source Port
Comparison Value
VLAN
Rule Number
PRE

Displaying the Forwarding Cache

To display the forwarding cache information:
1. In the L3 Forwarding Cache section of the Web Agent window, click
Forwarding Cache. The FE Cache dialog box opens.
2. To modify your FE Cache table, perform one of the following:
• To delete one or more entries, select the entry and click Flush Entry.
• To flush (clear) the entire table, click Flush Table.
• To refresh the contents of the table, click REFRESH.
Cajun P550/P220 Switch Operation Guide
Monitoring and Configuring the Forwarding Cache (Layer 3)
Table 11-4. Route Cache Entry Search Parameters
Allows you to search for all entries...
Within the routing cache that match the specified destination
address (IP address).
Within the routing cache that match the specified source
address (IP address).
By protocol identifier. By default, this field is 0 for IP (for
example, not supported by IP).
Within the routing cache that match the specified destination
port (IPU, IPM, IPX).
Within the routing cache that match the specified source port
(IPU, IPM, IPX).
Within the routing cache that match the specified comparison
value (TCP/UDP). Values include:
• DA - Destination address
• DASA - Destination and source address
• DAPROT - Destination address and protocol
• DADP - Destination address and destination port number
• DASAPROT - Destination and source address and
protocol
• DASADPSP - Destination and source address, and the
corresponding destination and source port numbers
Within the routing cache that match the specified VLAN name.
Within the routing cache that matches the specified rule
number associated with an access list.
That match the PRE that is associated with the fabric port ID.
11-5