Deleting Static Multicast Sessions - Lucent Technologies Cajun P220 Operation Manual

Managing Intelligent Multicasting (Layer 2 & Layer 3)
3. Use Table 15-6 to configure the new multicast session.
Parameter
IP Address
MAC Address
VLAN
4. Click CREATE to create the new static multicast session, or CANCEL to restore
previous settings.

Deleting Static Multicast Sessions

To delete a static multicast session:
1. In the Intelligent Multicasting section of the Web Agent window, click Static
Sessions. The Static Multicast Sessions dialog box opens.
2. Use Table 15-7 for more information on static multicast sessions.
Parameter
Select
VLAN
MAC Address
IP Address
Static Client Ports
3. Click DELETE to remove your selected static multicast session, or CANCEL to
restore previous settings.
15-10
Table 15-6. Static Multicast Session Configuration Parameters
Definition
The IP address of the new static multicast session. The
range must be between 224.0.1.0 to 239.255.255.255.
Enter the MAC address of the new static multicast session.
Specifying the MAC address is not used for an IP multicast
session.
Enter the VLAN associated with the new multicast session.
Click All to add all VLANs to the multicast session, or select
a specific VLAN from the pull-down menu.
Table 15-7. Static Multicast Sessions Parameters
Definition
Select the static multicast session to be modified.
Displays the VLAN on which the static multicast session exists.
Displays the MAC address of the static multicast session.
Displays the IP address associated with the static multicast session,
if available.
Displays the number of static client ports associated with the static
multicast session and opens the Static Multicast Session Client
Ports dialog box.
Cajun P550/P220 Switch Operation Guide