Searching The Ip Routing Table - Lucent Technologies Cajun P220 Operation Manual

Statistic
BOOTP/DHCP Out Requests
BOOTP/DHCP Out Responses

Searching the IP Routing Table

To use the IP routing table:
1. In the IP Display section of the Web Agent window, click Route Table Search.
The Route Table Search dialog box opens.
2. Select the search criteria you want to use to find more specific information on
available routes. For example, if you want to find all static routes that are presently
configured on your switch, search by source and specify static as your search value.
3. Use Table 7-12 to determine your search parameters:
Parameter
Source
Interface
IP Address
4. Click SEARCH to start the search. If routes are available, they are displayed in the
IP Routing Table dialog box.
Cajun P550/P220 Switch Operation Guide
Table 7-11. IP Routing Global Statistics (Continued)
Defines the...
Total number of BOOTP/DHCP requests forwarded by the
BOOTP/DHCP Relay Agent.
Total number of BOOTP/DHCP responses forwarded by the
BOOTP/DHCP Relay Agent.
Table 7-12. IP Route Table Search Parameters
Allows you to perform a search...
Of your IP routing table using one of the following
parameters:
• RIP
• OSPF
• Static
• Local
Once you select one of these parameters, the search
attempts to find routes associated the parameter you
chose.
Based on the interface you select. System default
entries include:
• Default
• Discard
• Ethernet Console
• Configured Interface
Based on an IP address you specify.
Configuring IP Routing (Layer 3)
7-25