Viewing The Appletalk Route Table - Lucent Technologies Cajun P220 Operation Manual

Configuring AppleTalk Routing (Layer 3)
Table 10-6. AppleTalk Interface Statistics Table Parameters (Continued)
Parameter
Seed
State

Viewing the AppleTalk Route Table

To view the AppleTalk route table:
1. In the AppleTalk Display section of the Web Agent window, click Route Table.
The AppleTalk Route Table opens.
2. Use Table 10-7 for more information on route table statistics.
Parameter
Select
Network Range
Metric
State
Owner
Next Hop
10-14
Definition
Displays whether the AppleTalk interface seeded the
network.
Displays the state of the AppleTalk interface.
Options include:
• Up - indicates that the AppleTalk interface is active.
• Down - indicates that the AppleTalk interface is
inactive.
Table 10-7. AppleTalk Route Table Parameters
Definition
Select the entry to be acted upon.
Displays the network range.
Displays the AppleTalk metric for the network range.
Displays the state of the entry.
Options include:
• Good
• Suspect
• Going Bad
• Bad
Displays the AppleTalk component responsible for the
addition of the route.
Options include:
• Local
• Static
• RTMP
Displays the next hop address where forwarded packets are
routed.
Cajun P550/P220 Switch Operation Guide