Viewing Hunt Group Members - Lucent Technologies Cajun P220 Operation Manual

4. For the selected port, click Enable to disable the port. The selection is removed and
the port is disabled. Disable all of the ports you are adding to the hunt group if this
is a new hunt group. If you are adding ports to an existing hunt group, disable the
ports you are adding.
5. On the first switch, in the Switching Parameters section of the Web Agent
window, select Hunt Groups. The first Hunt Group Configuration dialog box
opens.
6. Use Table 12-7 to configure your Hunt group:
Button or Link
Create
Delete
Members
Redistribute
7. Click CREATE. The second Hunt Group Configuration dialog box opens.
8. In the Name field, enter a name for the end of hunt group.
9. From the Load Sharing pull-down menu, select Enable to enable load sharing.
10. Click APPLY to save your changes, or CANCEL to restore previous settings.

Viewing Hunt Group Members

To view hunt group member details:
1. From the Switching Parameters section of the Web Agent window, click Hunt
Groups. The Hunt Group Configuration dialog box opens.
2. In the Members column, click the highlighted number. The Hunt Group
Members dialog box opens.
Cajun P550/P220 Switch Operation Guide
Using VLANs, Spanning Tree, and Hunt Groups (Layer 2 and Layer 3)
Table 12-7. Hunt Group Configuration Dialog Box
Function
Summons a screen that allows you to add new hunt groups.
Note:
This button is unavailable if you have read-only
privileges.
Deletes hunt groups that have a check next to the hunt group
name.
Lists port numbers of port that are members of the selected
hunt group and opens the Hunt Group Members dialog box.
Redistributes the hunt group learned addresses. Click this
button if you notice that a particular link has learned to many
of the busiest ports. The button causes the MAC addresses to be
redistributed among the hunt group ports.
12-13