Creating A Static Multicast Session - Lucent Technologies Cajun P220 Operation Manual

Parameter
Select
Port
Application
4. Click DELETE to remove your selected multicast session client port, or CANCEL
to restore previous settings.
Note: Static (Mgmt) client ports can only be removed through the Static Sessions
dialog box.

Creating a Static Multicast Session

To create a new static multicast session:
1. In the Intelligent Multicasting section of the Web Agent window, click Static
Sessions. The Static Multicast Sessions dialog box opens.
Note: You must enable intelligent multicasting on a global basis to make your static
multicast session active. See "Configuring Global Intelligent Multicasting",
earlier in this chapter.
2. Click Create New Session to create a new static multicast session. The Static
Multicast Session Configuration dialog box opens.
Cajun P550/P220 Switch Operation Guide
Table 15-5. Multicast Session Client Port Parameters
Definition
Select the multicast session client port.
Displays the client port number.
Displays the application(s) associated with this client port.
Applications include:
• Mgmt
• IGMP
• LGMP
• CGMP
Managing Intelligent Multicasting (Layer 2 & Layer 3)
15-9