Creating An Ip Helper Address - Lucent Technologies Cajun P220 Operation Manual

Creating an IP Helper Address

To create an IP helper address:
1. In the IP Configuration section of the Web Agent window, click IP Helper
Address. The IP Helper Address dialog box opens.
2. Click CREATE.
3. From the Interface pull-down menu, select the interface of the PC or server on
which you want to create an IP helper address.
4. In the Helper Address field, type the IP Address of the server that will receive
and pass along the broadcast from the switch.
5. Use Table 7-36 to determine the fields to enable:
Parameter
Interface
Helper Address
TFTP
DNS
TIME
NETBIOS Name Service
NETBIOS Date Service
BOOTP Server
BOOTP Client
TACACS
Cajun P550/P220 Switch Operation Guide
Table 7-36. IP Helper Address Parameters
Definition
Provides a list of interfaces associated with the switch
configuration.
Enables you to specify the IP Address of the server that
receives and passes along broadcasts from the switch.
Enables the helper to route files via Trivial File
Transfer Protocol (TFTP). The default value is Enabled.
Enables the
helper to route the
Dynamic Naming Service. The default value is
Enabled.
Enables the helper to route the system time of specified
computers on the VLAN.
Enables the helper to route the
computer on a VLAN via NETBIOS. The default value
is Enabled.
Enables the helper to route the current system date of a
computer on a VLAN via NETBIOS.
Enabled.
Enables the helper to route IP addresses assigned by a
Bootstrap Protocol (BOOTP) to a receiving computer.
default value is Enabled.
Enables the helper to route the IP address of a BOOTP
The default value is Enabled.
client.
Enables the helper to route
Terminal Access Controller Access Control System
(TACACS). The default value is Enabled.
Configuring IP Routing (Layer 3)
domain names via
The default value is Enabled.
name of a user or a
The default value is
passwords forwarded by the
The
7-51