Managing Intelligent Multicasting (Layer 2 & Layer 3)
Parameter
LGMP Message
Transmission Statistics
Intelligent Multicast
Session Statistics
3. Click...
•
APPLY to save your changes.
•
CANCEL to restore previous settings.
•
CLEAR to clear the statistics.
•
REFRESH to refresh the contents of the table.
Modifying the LGMP Server Display per VLAN
To modify the LGMP server display per VLAN:
1. In the Intelligent Multicasting section of the Web Agent window, click LGMP
Server. The LGMP Server Configuration dialog box opens.
Note: You must enable intelligent multicasting on a global basis to make your LGMP
server per VLAN configuration active.
2. In the LGMP Servers column, click the number. The LGMP Server Display per
VLAN opens.
15-14
Table 15-9. LGMP Server Configuration Parameters (Continued)
Definition
• Report - Displays the number of LGMP report
messages transmitted.
• Leave - Displays the number of LGMP leave messages
transmitted.
• End Session - Displays the number of LGMP end
session messages transmitted.
• Router Report - Displays the number of LGMP router
report messages transmitted.
• Router Leave - Displays the number of LGMP router
leave messages transmitted.
• Client Ports Added- Displays the number of add
client events generated by LGMP.
• Client Ports Removed - Displays the number of
remove client events generated by LGMP.
• Sessions Removed- Displays the number of remove
session events generated by LGMP.
• Router Ports Added- Displays the number of add
router events generated by LGMP.
• Router Ports Removed- Displays the number of
remove router events generated by LGMP.
Cajun P550/P220 Switch Operation Guide