Interpreting Rip Statistics - Lucent Technologies Cajun P220 Operation Manual

Configuring the RIP Routing Protocol (Layer 3)
To create a trusted RIP neighbor:
1. In the RIP Configuration section of the Web Agent window, click Trusted RIP
Neighbors. The Trusted RIP Neighbors dialog box opens.
2. Click CREATE. The Add Trusted RIP Neighbor dialog box opens.
3. Enter the Network Address of the node that acts as the trusted RIP neighbor.
4. Click CREATE to save your changes, or CANCEL to restore previous settings.

Interpreting RIP Statistics

To display RIP statistics:
1. In the RIP Display section of the Web Agent window, click Interface Statistics.
The Interface Statistics dialog box opens.
2. Use Table 8-3 to interpret the RIP statistics:
Parameter
Interface
State
IP Address
Triggered Updates Sent
Non-Triggered Updates
Sent
Updates Received
Bad Packets Received
Bad Routes Received
8-4
Table 8-3. RIP Statistical Parameters
Defines the...
Interface associated with the IP address specified.
Current status of the RIP route. UP indicates that the interface is up and
RIP can transmit and receive updates.
IP address associated with the interface.
Number of RIP triggered updates sent.
Number of RIP non-triggered updates sent.
Number of RIP updates received based on route changes in the IP routing
table.
Number of bad packets received on this interface.
Number of bad routes received on this interface.
Cajun P550/P220 Switch Operation Guide