Setting One-Time Summer Time Hours - Lucent Technologies Cajun P220 Operation Manual

Setting One-Time Summer Time Hours

To set Summer Time Hours that are not based on a standard rule:
1. In the System Information section of the Web Agent window, click System
Clock. The System Clock dialog box opens.
2. In Clock Options, click Summer Time Hours Algorithm. The Summer Time
Hours Configuration box opens.
3. From the Enable State pull-down menu, select Enable.
4. In the Offset cell of the Value column, enter the reset value for the clock in
minutes.
For example, if you intend to reset the clock forward or backward by one hour,
retain the default value of 60 minutes.
5. Click One-Time.
Note: The Web Agent enables you to select the boxes next to both Recurring and
One-time Summer Time Hours. However, the option to set both Recurring
and One-time hours is not provided.
6. Use Table 3-20 to configure Summer Time Hours on a one-time basis.
Parameter
One-time
Start
End
Cajun P550/P220 Switch Operation Guide
Table 3-20. One-Time Summer Time Hours Configuration
Definition
Select if Summer Time Hours change one time, such as on
a specified date.
When you select one-time Summer Time Hours, you
indicate the time and date on which Summer Time Hours
begin and end.
Specifies the start of Summer Time Hours.
Specifies the end of Summer Time Hours.
Configuring the Cajun P550 Switch (Layer 2 & Layer 3)
3-37