Configuring The Cajun Switch As An Ipx Router - Lucent Technologies Cajun P220 Operation Manual

Field
Packet Type
Destination Network
Destination Node
Destination Socket
Source Network
Source Node
Source Socket

Configuring the Cajun Switch as an IPX Router

To configure IPX routing globally on your switch:
1. From the IPX Configuration section of the Web Agent window, click Global
Configuration. The IPX Routing Global Configuration dialog box opens.
Cajun P550/P220 Switch Operation Guide
Table 4-1. IPX Datagram Fields (Continued)
Definition
Indicates the type of service required or offered by the
packet. Types include:
• Sequenced Packet Exchange (SPX packet)
• NetWare Core Protocol (NCP packet)
• NetBIOS (propagated packet)
The IPX network address of the destination network.
The MAC address of the destination node.
Address of the process running in the destination node.
Sockets route packets to different processes within the
same node.
The network address of the source network.
The MAC address of the source node.
Address of the process running in the source node.
Figure 4-2. IPX Routing Global Configuration Dialog Box
Configuring IPX Routing (Layer 3)
4-3