Entering General System Information; Enabling Sntp - Lucent Technologies Cajun P220 Operation Manual

Entering General System Information

The system allows you to enter general system identification information from the Web
Agent. Use these fields to uniquely identify each switch:
Switch name
Device location
Device contact
To change these values:
1. In the System Information section of the Web Agent window, click General. The
System Information dialog box opens (Figure 3-6).
2. In the Name field, enter a name for the switch.
3. In the Location field, enter the location for the switch (for example, floor and
closet location).
4. In the Contact field, enter information about the person who should be
contacted in the event of a problem.
5. Click APPLY to save your changes, or CANCEL to restore previous settings.

Enabling SNTP

The Simple Network Time Protocol (SNTP) ensures that you can automatically
synchronize time on all computers, switches, and other devices connected to your Cajun
P550 Switch. By enabling SNTP, you ensure that all devices connected to your switch
reflect the same time.
Cajun P550/P220 Switch Operation Guide
Figure 3-6. General System Information Dialog Box
Configuring the Cajun P550 Switch (Layer 2 & Layer 3)
3-33