Setting The Volume Of The Acoustic Signals - Lauda PROLINE P 5 C Operating Instructions Manual

7.8.6 Setting the volume of the acoustic signals

The LAUDA Proline Thermostats signal alarms as a dual-tone acoustic signal and warnings as a continuous tone.
Master
3x to
MNEnu
to 7x
PArA
Audio
AL 3
WX 2
or
Wait 4 seconds or
Command
Alarm
Pump Menu
02/2022
Audio
 Call the volume setting
to
 takes you to the alarm volume,
°C
the currently set volume, here
 ...
°C
 The currently set volume, here
 The volume display flashes.
 Select volume:
0
= off to
 You hear the alarm or warning tones at the selected volume.
 Display flashes 4 s  new value is automatically accepted, or
 value is immediately accepted with the Enter key.
loud
medium
low
off
End T
set
Proline heating thermostat
Audio
3
, is displayed or ...
and 1x takes you to the warning tone volume.
2
3
= loud.
Sounds
 Open the device parameter menu via the soft
key
 With the cursor keys continue to:

 Select either
 Example on left:
 Select the desired volume with
 Accept selection with
T
fix
window with
( 7.5).
, is displayed.
Menu .
Settings Basic settings

Alarm or Warning
Alarm is set to loud.
or End or quit the
without making changes.
Sounds .

.
oder .
53 / 123