Timer Function - Lauda PROLINE P 5 C Operating Instructions Manual

7.12 Timer function

Using the timer function, the thermostat can carry out an action at a certain time or after a certain waiting period. The
actions are: Switching on the thermostat, entering the standby mode or one of the five programs in the programmer.
Command
Pump
Settings
Graph
Clock
Programmer
Interfaces
Control
Temp.Limits
Pump Menu
Status
Function
Action
Set time
Set date
Pump Menu
72 / 123
Set time
Set date
Timer 1
Timer 2
Format of date
End T
set
Please exercise caution when thermostat is in standby mode! The thermostat is not switched off
safely.
A previously activated timer mode could unintentionally start the thermostat again from the
standby mode!
Week plan
Time absolute
Time relative
End T
set
Proline heating thermostat
Timer 1 Timer 2
 Open the device parameter menu via the soft
key
 With the cursor keys continue to:
Clock

 or to Timer 2
 with the menu
switched
The standby key does not stop the timer!
T
fix
The menu Function
tion is executed:
 Similar to an electronic mains timer,
plan enables two switching events to be carried
out each day. The cycle is repeated after 7
days.
Time absolute

which a once-only action (switching event) oc-
curs. The time point is set with
with Set
T
fix
Time relative

which a once-only action occurs. With
time up to 99h:59min can be entered. ( Set
date is masked out with this function selec-
tion).
 If the Week plan
only Status
displayed.
Menu .
Timer 1 ,

,
Status the selected timer is
off or on .
is used to define when an ac-
defines a time and a date on
Set time
date.
defines a waiting period after
is activated, in this window
, Function and Week plan
Week
and
Set
are
02/2022