Table of Contents
Advertisement
9
Maintenance
9.1
Cleaning
Cleaning can be carried out with water to which a few drops of surfactant (washing-up liquid) have been added and
using a damp cloth.
9.2
Device status
The thermostat can be conveniently checked with the Command remote control. Some values can however also be in-
terrogated in the Master version.
9.2.1 Interrogating the device type
MNEmv PArB. tYPG
Settings
The unit type for heating thermostats is being preset ex works. Please avoid to modify it!
9.2.2 Software Version
MNEmv ShoWX UEr
Here, only the version of the control system in the Master is displayed.
Settings
With the Command remote control the versions of the control system (
mand remote control (
9.2.3 Serial numbers
MNEmv ShoWX Snr H
Under
the first five places of the ten-character serial number of the Master device are displayed. Under
Snr H
the last five places are shown.
L
Settings
With the Command remote control the serial number of the Master (
mand
) and other connected modules are displayed.
02/2022
Withdraw the equipment mains plug before cleaning!
No water must enter the control section!
Carry out appropriate decontamination if hazardous material is spilt on or in the equipment.
The cleaning or decontamination method is determined by the user's specialist knowledge respec-
tively the corresponding data sheets. In case of doubt contact the manufacturer of the hazardous
material.
. ( 7.5)
Device status
Device type
( 7.5)
Device status
Software version
Command
) and, where applicable, other connected modules are displayed.
Device status
Serial numbers
Proline heating thermostat
.
.
und
( 7.5)
Snr L
.
Control
), safety system (
Master
), Command remote control (
Safety
), Com-
Snr
Com-
101 / 123
Advertisement
Table of Contents
