Obtaining Information On A Program (Info) - Lauda PROLINE P 5 C Operating Instructions Manual

T °C
27,00
26,00
25,00
24,00
23,00
Pump 00:00 Menu
02:15

7.10.7 Obtaining information on a program (Info)

Command
Status
Edit
Loops
Graph
Info
Pump Menu
70 / 123
00:45 End 01:30 T
set
Segments
Temp.min 20.00°C
Temp.max 40.00°C
Duration 01:00
Seg.free
Actual Seg.
Seg.Remain 00:05
Loop actual
End Prog.1 Stanby
Proline heating thermostat
 The display of the programmed temperature
curve can be quit with
T
fix
Programmer Program1 Info
 Continue with
2
Here, all information is displayed about the entered
program sequence.
 Number of segments.
145
 Minimum temperature in °C.
5
 Maximum temperature in °C.
3
 Program duration in hh:mm (without the time,
which is necessary to process step changes in
temperature).
 Number of free segments.
 Segment, which is at present (currently) being
processed.
 Residual time of the current segment, in hours
and minutes.
 Current pass; in the example the third of all
passes is running.
The last three points are only displayed when a pro-
gram runs.
 Quit the window with
or End .
to Info.
or End .
02/2022