Switching Off; Witching Off Standby; Key Functions; General Key Functions And Pilot Lamps - Lauda PROLINE P 5 C Operating Instructions Manual

7.3 Switching off / standby
Switching off: Set mains switch to position 0.
Standby operation: Use the key
The operating display remains active, so that the device status is visible and adjustments can be made.
7.4

Key functions

Your Proline Thermostat is easy to operate.

7.4.1 General key functions and pilot lamps

Master
or
...
02/2022
on the Command remote control. The pump and heater are switched off.
The timer continues to run. Stop as required with
Enter key:
 From the actual-value display at the main menu level,
 activates input, display flashes,
 saves input, display ceases to flash and menu point is left,
 press for approx. 3 s: Exit function and returns to bath temperature display.
 Paging with keys is possible within the relevant level,
or setting of numerical values
Speeds up entry by moving the counting position to the left:
a) Keys are pressed and held down or
b) One of the two keys is pressed and held down, followed immediately by brief
pressing of the other key.
Moves counting position to the right:
 Switching one place to the right occurs by briefly (1 s) releasing the key, fol-
lowed by another pressing of the key.
Useful additional information:
 Two dots in the Master display indicate that a submenu follows.
°C
 Three dots in the display indicate that a submenu for a module (interface...) or
a component (thermostat, Command remote control ....) follows. Mod-
ule/component-specific possible settings are only displayed when the hard-
ware is connected.
Proline heating thermostat
Pause ( 7.12).
29 / 123