Setting The Volume Of The Acoustic Signals - Lauda RP 845 Operating Instructions Manual

Proline Low-temperature Thermostats

7.8.6 Setting the volume of the acoustic signals

The LAUDA Proline Thermostats signal alarms as a dual-tone acoustic signal and warnings as a
continuous tone.
Master
LMDls
3x to
O@p@
to 7x
@schm
@K 2
VW 1
or
Wait 4 seconds or
Command
Alarm
Help Menu
YACE0072 / 21.08.07
@schm
− Call the volume setting
to
−
°C
the currently set volume, here
− ...
°C
− The currently set volume, here
− The volume display flashes.
− Select volume:
/
= off to
− You hear the alarm or warning tones at the selected volume.
− Display flashes 4 s
− Value is immediately accepted with the Enter key.
loud
medium
low
off
End T
set
@schm
takes you to the alarm volume,
and 1x takes you to the warning tone volume.
2
= loud.
new value is automatically accepted, or
Sounds
− Open the device parameter menu via the
soft key
− With the cursor keys continue to
Sounds
− Select either
− Example on left:
− Select the desired volume with
− Accept selection with
T
quit the window with
fix
changes.
Starting up
( 7.6.4).
2
, is displayed or ...
1
, is displayed.
Menu .
Settings Basic Settings
.
Alarm or
Alarm
.
without making
Warning .
is set to loud.
or
or End or
67