Radio Configuration; Configuring A Jns 2W Uhf 410-470 Radio Transceiver; Installing Modem-Jns - Javad Maxor Operator's Manual

C O N F I G U R A T I O N
2

Radio Configuration

Radio Configuration

The internal radio in your Maxor can be configured differently depending on
your needs and working conditions. The software program required to configure
the radio modem differs depending on your receiver configuration, and allows
you to:
• access the internal modem
• configure the modem
• check or change the modem configuration
The following sections provide basic radio configuration information for UHF
and single GSM radio modems.
For the detailed description of the Modem-JNS software see Modem-JNS
Software Manual on our website (http://www.javad.com).
Notice: Your receiver may be configured without a radio modem.
If this is the case, please skip to "Bluetooth® Module
Configuration" on page 2-40.

Configuring a JNS 2W UHF 410-470 radio transceiver

Modem-JNS is JNS's radio modem configuration utility for modems
embedded in Maxor family receivers. Modem-JNS provides the following
functions:

Installing Modem-JNS

Notice: Use Modem-JNS version 1.7 or newer to correctly
configure the receiver.
2-26 Maxor Operator's Manual
• Connecting a PC to an integrated radio modem via a serial port or
Bluetooth® wireless technology.
• Displaying information about the radio modem installed in the receiver.
• Programming the radio modem's settings.
Modem-JNS is available from the Support area (Free Software
section) of JNS website (http://www.javad.com). If downloading the
program from the website, extract the program files into a folder on
your hard drive.
www.javad.com