Javad Maxor Operator's Manual page 135

Can't find Bluetooth.
The receiver's Slot 3 is
turned off.
The Bluetooth® module
is linked with another
device.
The
module's processor is
overloaded.
The receiver does not
have
module.
Open COM# port failed: Access is denied.
Another application uses
the
dedicated for connection.
After searching for available devices, none are discovered.
The
receiving power.
The receiver's Slot 3 is
turned off.
www.javad.com
Causes
Connect your receiver and a computer using an RS232 cable (see
"Connecting the Maxor and a Computer" on page 2-9).
Click Configuration->Receiver ->General.
In the Turn on/off Slots area, enable the Slot 3 (B) check box.
Close the connection with the device, then connect to your
receiver.
Put your receiver in Zero Power Mode. See "Zero Power Mode"
Bluetooth® on page 4-19 for details.
Press and hold the Reset key for about one second to return the
receiver to normal mode.
Re-connect to the Bluetooth® module.
a Bluetooth® Contact your dealer to purchase a Bluetooth® enabled receiver.
Causes
Close the application, then re-connect.
computer port
Connect the receiver via another, unused computer port.
Causes
Check that the receiver is getting power and is turned on.
Check that the power cable is attached to the port marked
"PWR".
receiver is not
Unplug the cable, then securely and properly reconnect it to the
receiver.
If the power cable is damaged, contact your Dealer to purchase a
new cable.
Connect your receiver and a computer using an RS232 cable (see
"Connecting the Maxor and a Computer" on page 2-9).
Click Configuration->Receiver->General.
In the Turn on/off Slots area, enable the Slot 3 (B) check box.
Error Message
Solutions
Solutions
Solutions
TR O U B L E S H O O T I N G
Bluetooth® Problems
Maxor Operator's Manual 5-9