Program Tab Settings - Javad Maxor Operator's Manual

Notice: If you selected an incorrect file, an error message
displays at the bottom of the dialog box. Select the
correct file.
www.javad.com
3. Browse for and select the Bluetooth module's RAM file and Flash file
(Figure 4-20 on page 4-27).
4. Click Load and wait until 100% of the files load into your receiver
(Figure 4-21).
Figure 4-21. Bluetooth Firmware Load Complete
5. Click File -> Exit.
Figure 4-20. Program Tab Settings
O P E R A T I O N
Loading New Firmware
Maxor Operator's Manual 4-27