A P P E N D I X
B
Receiver Specifications
Status
Results
Ambiguity
level
Base or Rover
Static, Fast Static
Kinematic, RTK
DGPS
Cold Start
Warm Start
Reacquisition
B-6 Maxor Operator's Manual
Table B-1. Receiver General Specifications (Continued)
Fix, Float, DOP, Data Link Status, Modem Latency, Common
satellites, Percentage of fixing
RTK coordinates, HRMS, VRMS, Covariance Matrix
fixing
Selectable thresholds
Low: 95%; Medium: 99.5%; High: 99.9%
Measuring Modes
Static
Kinematic (Stop and Go)
RTK (Real-time Kinematic)
DGPS (Differential GPS)
WASS/EGNOS DGPS
Measuring Accuracy
For L1+L2 – H: 3mm + 0.5ppm (x baseline length);
V: 5mm + 0.5ppm (x baseline length)
For L1+ L2, L1 – H: 10mm + 1.0ppm (x baseline length)
V: 15mm + 1.0ppm (x baseline length)
Post processing: typically 0.3m
DGPS/RTCM based: typically less than 0.5m
< 60 sec
< 10 sec
< 1 sec
;
www.javad.com
Need help?
Do you have a question about the Maxor and is the answer not in the manual?