Javad Maxor Operator's Manual page 131

The receiver tracks too few satellites.
The
value is too high (e.g.,
above 15 degrees).
The
conducted
obstructions
canopy, tall buildings,
etc.).
The receiver cannot obtain Code Differential and/or RTK solutions.
Incorrect
coordinates entered.
The
configured as a Base or
Rover.
The
receiver options may be
disabled or expired.
There are not enough
common satellites. In
order to obtain a fixed
solution, the Base and
Rover should track at
least
satellites.
www.javad.com
Causes
elevation mask
Lower the elevation mask.
Check that the Multipath Reduction boxes have been enabled.
measuring is
Connect your receiver and a computer and start PCView. See
near
"Connecting the Maxor and a Computer" on page 2-9.
(tree
Click Configuration->Advanced->Multipath Reduction and
enable the two boxes.
Move to an area free of obstructions, if applicable.
Causes
Base Specify the correct coordinates for the Base station using
PCView or other suitable field data collection software.
If the receiver should function as a Base, ensure it has the proper
configuration. See "Measuring with the Maxor" on page 3-7 for
receiver is not
further information.
If the receiver should function as a Rover, ensure it has the proper
configuration. See "Measuring with the Maxor" on page 3-7 for
further information
See "Checking an OAF" on page 4-13 for details on how to check
corresponding current options.
Enable or prolong the validity of the corresponding receiver
options by ordering a new OAF with the desired options
activated.
Ensure that both the Rover and Base receivers use the same, and
updated, almanac. See "Collecting Almanacs" on page 2-44.
Check the elevation masks of the Rover and Base receivers; they
should be the same.
five common
TR O U B L E S H O O T I N G
Problem
Solutions
Problem
Solutions
Maxor Operator's Manual 5-5
Receiver Problems