Advanced Configuration - Multipath Reduction; Advanced Configuration - Loop Management - Javad Maxor Operator's Manual

C O N F I G U R A T I O N
Maxor Configuration
• Carrier multipath reduction
Figure 2-16. Advanced Configuration – Multipath Reduction
Click the Loop Management tab, enable the following boxes, and click
5.
Apply (Figure 2-17):
• Enable Common Tracking
• Static Mode (used for static receivers only, disable if using the receiver as a
Rover)
Figure 2-17. Advanced Configuration – Loop Management
www.javad.com Maxor Operator's Manual 2-17