Cables; Software - Javad Maxor Operator's Manual

Cables

Software

1. Only supplied for the Maxor with the USB option enabled.
www.javad.com
Standard Maxor accessories include the following cables:
• Receiver-to-computer RS232 serial cable
• Receiver-to-SAE power cable
• SAE-to-SAE cable extension
1
• USB cable
• Power supply with SAE connector and power/charger cable
Standard Maxor software includes:
• PCView Lite– controller software that can run on a Windows®-based
computer. Please refer to the PCView Software Manual for detailed
information on this software.
• GPS radio configuration software – for configuring the radio; such as,
"Modem-JNS" and "FieldView".
Software and software manuals are also available on the JNS website
(http://www.javad.com).
The following software will also be useful for operating, caring for and
using your Maxor receiver, and may be required for some applications.
• FLoader – JNS's firmware loader; available from the JNS website.
• Modem-JNS - JNS's modem configuration software; available from the
JNS website.
• PDLCONF from Pacific Crest – firmware upgrades available from the
Pacific Crest website (www.paccrst.com/download/upgrade.htm).
• BTCONF – JNS's Bluetooth® module configuration program;
available from the JNS website.
• FieldView – JNS's field data collection software; among many other
functions, can be used to configure the radio-modem.
• Ensemble – JNS's post-processing software.
I N T R O D U C T I O N
Maxor Accessory Kit
Maxor Operator's Manual 1-7