Maxor Accessory Kit - Javad Maxor Operator's Manual

I N T R O D U C T I O N
1

Maxor Accessory Kit

After the receiver locks on to four or more satellites, it is possible to solve the
so-called "absolute positioning problem" and compute the receiver's
coordinates (in WGS-84 or another datum) and time. All this information is
stored in the receiver's memory, which can be downloaded later onto a
computer and processed using a post-processing software package. When the
receiver is run in RTK mode, raw data measurements can also be recorded into
the receiver's internal memory. This allows the operator to double check real-
time results obtained in the field.
Depending on your options, capabilities of the receiver include:
• Common Tracking
• Multipath reduction
• Wide area augmentation system (WAAS)
• Adjustable phase locked loop (PLL) and delay lock loop (DLL) parameters
• Dual-frequency static, kinematic, real-time kinematic (RTK), and differential
GPS (DGPS) measuring modes
• Auto data logging
• Setting different mask angles
• Setting different measuring parameters
• Static or dynamic modes

Maxor Accessory Kit

Although the Maxor can be supplied with a number of different accessories, this
manual refers to the standard kit.
Unpack the kit contents and check all the items thoroughly. If any item included
is damaged or missing, get in touch with your dealer as quickly as possible. The
contents of the standard accessory kit contain:
• Cables
• Software
• Literature
1-6 Maxor Operator's Manual www.javad.com