Maintenance, Cleaning, Disposal; Maintenance; Replacing The Rechargeable Batteries - wtw Multi 3410 Operating Manual

Digital ph / dissolved oxygen / conductivity meter for a digital ids sensor
Hide thumbs Also See for Multi 3410:
Table of Contents

Advertisement

Multi 3410
ba75863e02
12/2009
5

Maintenance, cleaning, disposal

5.1

Maintenance

The only maintenance activity required is replacing the batteries.
Note
See the relevant operating manuals of the IDS sensors for instructions
on maintenance.

5.1.1 Replacing the rechargeable batteries

1
Unscrew the two screws (1) on the underside of the meter.
2
Open the battery compartment (2) on the underside of the
meter.
3
Remove the four rechargeable batteries from the battery com-
partment.
4
Place four new rechargeable batteries (type Mignon AA) in the
battery compartment.
CAUTION
Make sure that the poles of the rechargeable batteries are posi-
tioned correctly.
±
The
signs on the batteries must correspond to the
battery compartment.
Maintenance, cleaning, disposal
1
2
±
signs in the
85

Advertisement

Table of Contents
loading

Table of Contents