Temperature Probe Control Mode; Check Remaining Run Time - Thermo Scientific HPS RT2 Advanced Manual

Section 4
Control Panel
Check Remaining Run
Temperature Probe
Control Mode
4-12 Digital Hotplate
Check the remaining run time during a timed operation by performing the
following.
Time
(1) Press TIMER Button once to check the remaining time during timed
operation.
After 15 seconds, the mode will be escaped automatically.
Escape of timer mode is shown as below.
Step 1 : Press RUN/STOP Button.
Step 2 : Turn the Stirrer Knob clockwise and press the Stirrer Knob.
Connect temperature probe to
the unit. The default mode will
be automatically changed to the
Temperature Probe Control
Mode and display shows the
temperature value detected by
the probe.
[For the temperature probe
connection to the unit, Refer to
Connecting Temperature Probe]
Thermo Scientific