Timer Setting During Heating - Thermo Scientific HPS RT2 Advanced Manual

Timer Setting
(continued)
Timer Setting During
Thermo Scientific
Step 4: Then, the following display will appear asking whether you want
to start the timer operation or not. If you want to save the new timer
setting and to start the timer operation, you are required to change 'NO'
to 'YES' by turning the Stirrer Knob and press it for confirmation as
shown below.
[Operating confirmation]
Step 5: When the timer operation ends, you will be alerted by audible sig-
nals as well as the following display.
Terminate the timer operation either by pressing the RUN/STOP Button
or by turning off the main power switch.
Press TIMER Button once to check run(remained) time of heating if
heater is in operation.
Heating
Press TIMER Button twice to set timer during heating and follow above
instruction (1) for timer setting.
Section 4
Control Panel
Digital Hotplate 4-11